![]() Change the name of the "boo圆4 or bootx32" file to "boot" according to the architecture of your processor. If you can't boot, come back and change the name of the "boot" file to "boot-default". Try to boot already without touching the default "boot" file that comes in the EFI partition. OS type: Windows 8.1/10 UEFI Mode (some motherboards may require "Other OS" instead).Please ensure that Booter -> Quirks -> ResizeAppleGpuBars is set to 0 if this is enabled. 2020+ BIOS Notes: When enabling Above4G, Resizable BAR Support may become an available on some X570 and newer motherboards.Ethernet) and/or boot failures on other OSes, if it does happen then disable this option and opt for npci instead If you are on a Gigabyte/Aorus or an AsRock motherboard, enabling this option may break certain drivers(ie.Do not have both this option and npci enabled at the same time.) Above 4G Decoding (This must be on, if you can't find the option then add npci=0x3000 to boot-args.DVMT Pre-Allocated(iGPU Memory): 64MB or higherīefore you start, reset your BIOS settings to default.OS type: OS type: Windows 8.1/10 UEFI Mode (some motherboards may require "Other OS" instead).Your hack will not boot with CFG-Lock enabled) CFG Lock (MSR 0圎2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks.Thunderbolt (For initial install, as Thunderbolt can cause issues if not setup correctly).Compatibility Support Module (CSM) (Must be off in most cases, GPU errors/stalls like gIO are common when this option is enabled).Before you start, reset your BIOS settings to default. ![]() Note: Most of these options may not be present in your firmware, we recommend matching up as closely as possible but don't be too concerned if many of these options are not available in your BIOS
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |